MetaFix® Reagents are customized formulations of reducing agents, reactive minerals, mineral activators, catalysts and pH modifiers to cost effectively address heavy metals at even the most challenging sites. MetaFix is capable of treating comingled plumes of multiple heavy metals and chlorinated solvents.
EHC® Metals Reagent is now a part of the MetaFix portfolio of customizable reagents, allowing us to deliver robust solutions and provide more effective treatment of metals contaminated sites.
Following placement of MetaFix into the treatment zone, a number of physical and chemical processes combine to create geochemical conditions under which common heavy metals are subjected to reduction, adsorption, precipitation, and conversion to stable sulfide and iron-sulfide precipitates. These heavy metal sulfide precipitates have greater stability than metal hydroxide precipitates that are formed with traditional metals treatment approaches based on pH adjustment. A custom MetaFix blend is developed based on a site’s specific conditions through a low-cost treatability study to address soil and/or groundwater impacts.
A lab treatability study was conducted to determine the optimal MetaFix reagent formulation and dosing rate to treat the highly contaminated soil samples with a total arsenic concentration of 21,700 mg/kg.
A lab treatability study was conducted to determine the optimal MetaFix reagent formulation and dosing rate to treat the four heavy metals of concern: As, Cd, Pb, and Zn.
A lab treatability study was conducted to determine the optimal MetaFix Reagents formulation and dosing rate to treat the highly contaminated soil samples.
EHC Metals Reagent is now a part of the MetaFix portfolio of customizable reagents. EHC Metals effectively treated TCE and immobilized Cr(VI) from groundwater to below detection limits at a manufacturing facility in Washington state.
The main contaminant of concern, aluminum, has decreased from a baseline concentration of 1,530 μg/L to 224 μg/L after ten months, which is well below the remedial goal of 750 μg/L. Significant reductions also have been observed in dissolved arsenic and copper downgradient from the PRB.
A colorless liquid that is mobile in groundwater, toxic at low levels, and has a high density, making cleanup activities more difficult than for oil spills.
A chlorinated hydrocarbon commonly used in dry cleaning and degreasing. Solubility in water 1.28 g / L and a log Kow of 320. May form dense non-aqueous phase liquids (DNAPLs). Anticipated to be a human carcinogen. MCL of 5 ppb.
A chloroalkane with two isomers (1,1,1- TCA and 1,1,2 – TCA) used widely as a solvent, especially in the electronics industry. It is considered insoluble in water and may for dense non-aqueous phase liquids (DNAPLs). Low toxicity but may impact central nervous system. MCL of 0.2 ppm.
A chlorinated hydrocarbon that is not easily soluble in water, but miscible with most organic solvents. A common source of the contaminant in drinking water is from the discharge from industrial chemical factories.
An organic compound formerly used in fire extinguishers, as a precursor to refrigerants, and as a cleaning agent.
Commonly known by its old name ethyl chloride, it is a colorless, flammable gas or refrigerated liquid with a faintly sweet odor. Ethyl chloride is the least toxic of the chloroethanes. Exposure to ethyl chloride may occur from using consumer products containing it, including solvents, refrigerants, topical anesthetics, and in dyes, chemicals, and pharmaceuticals.
A colorless, sweet-smelling, dense liquid that is considered somewhat hazardous. Chloroform may be released to the air as a result of its formation in the chlorination of drinking water, wastewater and swimming pools. Other sources include pulp and paper mills, hazardous waste sites, and sanitary landfills.
Also called methyl chloride, R-40 or HCC 40, it is a chemical compound of the group of organic compounds called haloalkanes. Low levels of methyl chloride occur naturally in the environment, but higher levels may occur at chemical plants where it is or was made.
A group of three isomeric chemical compounds. They (ortho-chlorotoluene, meta-chlorotoluene, and para-chlorotoluene) consist of a disubsituted benzene ring with one chlorine atom and one methyl group.
Also called Dichloromethane (DCM), it is a colorless, volatile liquid with a moderately sweet aroma and is widely used as a solvent in paint strippers and removers; as a process solvent in the manufacturing of drugs, pharmaceuticals, and film coatings; as a metal cleaning and finishing solvent in electronics manufacturing; and as an agent in urethane foam blowing.
An organochloride used chiefly in the production of polyvinyl chloride (PVC) and may be a daughter product formed during the reductive dechlorination of TCE and DCE. Solubility in water 2.7 g / L and a Kow of 15. It is a known human carcinogen and causes liver damage. MCL of 2 ppb.
A colorless, flammable liquid with a sweet odor, it is used to make other organic chemicals, lead free gasoline, paper coating, soil fumigant for nematodes, and insecticide for stored grain.
A colorless liquid with a sweet smell that is a byproduct in the chlorination of propene to make allyl chloride. The general public may be exposed via inhalation near source areas or from the consumption of contaminated drinking water from wells near some hazardous waste sites.
A colorless liquid at room temperature that has an odor similar to that of turpentine. Also known as HCBD, it is primarily produced in chlorinolysis plants as a by-product in the production of carbon tetrachloride and tetrachloroethene.
1,1,1,2-Tetrachloroethane (R-130a) - A colorless liquid with a sweet chloroform-like odor that is used as a solvent and in the production of wood stains and varnishes. 1,1,2,2-Tetrachloroethane (R-130) – A chlorinated derivative of ethane. It has the highest solvent power of any chlorinated hydrocarbon.
Produced via the chlorination of propylene and as a byproduct of processes primarily used to produce.
Pure pentachlorophenol exists as colorless crystals and impure pentachlorophenol is dark gray to brown and exists as dust, beads, or flakes. It is used as a pesticide, a disinfectant and as a wood preservative for utility poles, railroad ties, and wharf pilings.
1,2-Dichlorobenzene or ortho-dichlorobenzene - A colourless liquid that is poorly soluble in water but miscible with most organic solvents. 1,3-Dichlorobenzene or meta-dichlorobenzene. 1,4-Dichlorobenzene or para-dichlorobenzene - A colorless solid with a strong odor.
1,2,4-Trichlorobenzene - A colorless liquid used as a solvent for a variety of compounds and materials. 1,3,5-Trichlorobenzene - Colorless crystals, whereas the other isomers are liquids at room temperature.
A colorless gas.
A colorless, nearly odorless liquid that boils at about room temperature.
A very unreactive chlorofluorocarbon, that will stay in the atmosphere for a great deal of time if it is released.
An organochlorine compound used as a pesticide.
A highly chlorinated organic pesticide that was used as an insecticide. Also known as chlordecone, it is a tan to white, crystalline, odorless solid.
Created when a substance called heptachlor is released to the environment and mixes with oxygen. It was used to kill termites found in the home and farmers used it to kill insects found on farm crops.
An organochlorine chemical variant of hexachlorocyclohexane that has been used both as an agricultural insecticide and as a pharmaceutical treatment for lice and scabies.
Commercial DDT is a mixture of several closely–related compounds. Dichlorodiphenyldichloroethylene (DDE) and dichlorodiphenyldichloroethane (DDD) make up the balance. DDE and DDD are also the major metabolites and breakdown products in the environment.
A mixture of approximately 200 organic compounds, formed by the chlorination of camphene.
Can be formed from the synthesis of hexachloro-1,3-cyclopentadiene with norbornadiene in a Diels-Alder reaction, followed by epoxidation of the norbornene ring and is known to resist bacterial and chemical breakdown processes in the environment.
Manufactured from chloroacetic acid and 2,4-dichlorophenol, which is itself produced by chlorination of phenol.
A synthetic auxin.
is an organochloride that was primarily used as an insecticide and rodenticide and infamous as a persistent organic pollutant and banned in many countries.
Odorless, tasteless, clear to pale-yellow, viscous liquids (highly chlorinated mixtures are more viscous and deeper yellow), that are found in electric motors, transformers and capacitors.
Produced by a number of species of nitrifying bacteria and are mainly produced for use as fertilizers in agriculture because of their high solubility and biodegradability.
A yellow colored solid sometimes used as a reagent in chemical synthesis, found in military explosives or industrial applications.
A pale yellow crystalline solid that is well known as a precursor to TNT, and is usually used in the production of toluene diisocyanate, which is used to produce flexible polyurethane foams.
A heavy, colorless, oily, explosive liquid used in medicine, industry, and in explosives.
An explosive nitroamine widely used in military and industrial applications.
The salts derived from perchloric acid, that are often found near contaminated industrial sites.
A shiny silver-white metal, mercury is the only metallic element that is liquid under normal environmental conditions. The most toxic forms of mercury are its organic compounds, including dimethylmercury and methylmercury.
A lustrous gray metalloid, usually mined as a sulfide, that is found in discharge from petroleum refineries, fire retardants, ceramics, electronics and solder.
A metalloid used mainly for strengthening alloys of copper and especially lead, that could be found as a result of erosion of natural deposits or runoff from orchards, glass and electronics production wastes.
A soft silvery metallic alkaline earth metal that is found in discharge from drilling wastes and metal refineries, and from erosion of natural deposits.
A heavy metal that is used in the smelting of iron, copper and lead ores and in pigments, batteries and metal plating. Exposure is primarily from burning of fossil fuels and incineration. It is listed as a possible carcinogen by the EPA (Group B1) and may lead to lung and kidney disease. The maximum contaminant level goal set by EPA for groundwater is 5 ppb.
A steely-gray, lustrous, hard and brittle metal which takes a high polish, resists tarnishing, and has a high melting point, found in discharge from steel and pulp mills, and erosion of natural deposits.
A hard, lustrous, silver-gray metal. The main source of the element is as a by-product of copper and nickel mining.
A ductile metal with very high thermal and electrical conductivity, found in corrosion of household plumbing systems and erosion of natural deposits.
A soft and malleable metal, which is regarded as a heavy metal and poor metal, that could be found due to corrosion of household plumbing systems or erosion of natural deposits.
A transition metal that is hard and ductile, usually distributed evenly in soil but typically accumulates at the surface from deposition by industrial and agricultural activities.
A nonmetal with properties that are intermediate between those of sulfur and tellurium, found in discharge from petroleum refineries and mines, and in erosion of natural deposits.
A bluish-white, lustrous, diamagnetic metal, most commonly used as an anti-corrosion agent, and can be found at high levels in industrial or mining areas.